Firstsing 12038 Computer case fan DC dual ball axial 12CM Cooling Fan
Size: 120mm x 120mm x 38mm
Speed(RPM):4500
Current(A):1.1
Power(W): 13.2
Air Flow: 189.8 cfm
Noise: 57.5 dBA
Voltage: 12 Volt DV
Bearing: Double Ball Bearing
Power Connector: 3 Pin
Wiring: 3 wire Lead
承 认 书
SPECIFICATION
FORAPPROVAL
WE ARE PLEASED IN SUBMITTING YOU HEREWITH OUR SPECIFICATION, DRAWING TOGETHER WITH SAMPLES FOR YOUR APPROVAL. PLEASE RETURN TO US ONE COPY WITH YOUR AUTHORIZED SIGNATURE AS APPROVED.
4,500±10%RPM,12V,TWO BALL BEARING, 2510-3P,L=600±10MM
核准 |
審查 |
製作 |
John |
Jason |
Sqk |
CUSTOMER’S PARTNUMBER |
|
APPROVED DATE |
|
APPROVED SIGNATURE |
|
ISSUE BY :
CONTENT COVER FAN(Drawing)------------------------appendix1 1.0一般規格(General Specification)------------page3 2.0主要材料/零件(Main Materials /parts Specification)--------------page4 3.0電性規格(Electrical Specifically)---------page4 4.0環境測試(Environmental Specification)-----page5 5.0 风压&风量(Performance Curves)-------------page5 6.0说明书(Specification)----------------------page6 7.0警告(Warning on product safety)--------------page7 8.0風扇圖面 [Fan Drawing 12038G***]-------------page8 |
1.0一般規格(General Specification)
|
4.0環境測試(Environmental Specification)
5.0 风压&风量(Performance Curves) TEST CONDITION: INPUT VOLTAGE--RATED VOLTAGE TEMPERATURE--ROOM TEMPERATURE HUMIDITY--HUMIDITY |
SPECIFICATION |
!WARNING ON PRODUCT SAFETY 01.We can not guarantee our products if your application exceeds the limitations mentioned in our specification . 02.Please check the safety of your product carefully when installing into your machine .
If problem occurred,please report it to us before the shipment of your machines into the market. 03.This motor is not equipped with a thermoprotector such as thermo fuse ,or current-fuse or thermo protector. There may be smoking,ignition or electric shock by insulation degradation in cases of motor lock ,motor lead short circuit, over load, over voltage or other failure. Please add the protection circuit on your machine. 04.This product has no alarm signal when the motor is locked. Make the proper design to your product against the motor lock. 05.Please do not touch the live and rotation parts during operation. There may be struck by electricity or injury. 06.Please be careful when handling the product. 07.If you hit or drop this product,the product may be damaged. Please be careful when handling and installing this product. 08.Please do not injure this product including coil and lead wires when installing or wiring.There may be smoking or fire. 09.If a certain item is not mentioned in the specification and you think it is mecessary to discuss the item, please advise us in advance.Otherwise we will consider there is no specification problem and start shipment as per our specification. |
IMPORTANTHANDLINGPRECAUTIONS |
01.Please do not touch or push fan blade with fingers or any other object . Fan blade and bearings may be damaged and a noise defect may result. ’ TOUCH! DON’TPUSH! 02.Do not exert excessive force on the back of the fan when applying adhesive mounting tape. Fan blade extends beyond the front face of the frame. 03.Do not lay the fan face down on a flat surface to apply adhesive mounting tape. Allow a space for the clearance of the blade. |